SET-101 (2 inputs, 230V)

The SET-101 is used for measure the maximal level and sludge or silt level in any type of settling tank or separator with integrated settler (oil, fat, grease, petroleum substances separators).

1 x SQUEALER-1 (controller)
1 x MAX (maximal level probe for water, oil, fat, grease, petroleum substances)
1 x SLUDO (sludge or silt probe)

Category:

Description

The set includes SQUEALER controller, MAX and SLUDO probe. The set is build on the basis of a modern microprocessor devices for continuous monitoring the status of selected probes. The basic parameters of the controller is 2 inputs, 1 relay output, LEDs indicating normal state, failure status and alarm status, buzzer generating an alarm signal, alarm output, relay output, activated at the time of alarm.

SQUEALER-2
โ€“ 2 inputs (overflow, fat layer thickness or oil level, the level of sludge)
โ€“ 1 output (potential-free relay)
โ€“ 230V power supply
โ€“ Hermetic housing used outdoor
โ€“ Dipswitch (programming using dipswitches)
โ€“ Optical and acoustic signals of troubles and alarms on the front panel
โ€“ Sensor diagnostic (opening / short circuit)

MAX
(overflow probe, with 5m cable, 4-20mA, ATEX, 4-20mA)
Oil level measurement; measurement of petroleum substances; fat layer thickness measurement; conductivity technology; ATEX certified. Output signal 4-20mA.

SLUDO
(sludge probe, with 5m cable, ATEX, 4-20mA)
Detection of the sediment layer; ultrasonic technology; impulse measurement; non-corrosive material; work in full immersion of liquid; ATEX certified. Output signal 4-20mA.

Front panel description.
โ€“ LED green โ€“ probe is OK
โ€“ LED lights alternately green and red โ€“ ALARM
โ€“ LED lights alternately yellow and red โ€“ FAILURE
โ€“ Short press โ€“ cancel acoustic alarm signal.
โ€“ Long press of the button โ€“ device test (LED, BUZER and RELAY). Test possible only in normal state (without alarm).

Technical data
โ€“ Power: 230V AC
โ€“ Max. fuse: 1.25 A
โ€“ Power Consumption (nominal): 2.2 VA
โ€“ Output: NO/NC potential-free relay, 2A/120VAC or 2A/24VDC
โ€“ Ambient temperature: -40 to + 60 ยฐ C
โ€“ Mechanical strength: IK 07
โ€“ Housing dimensions (without glands)(HxWxD): 96 x 130 x 66 mm