Description
STARTUP STEPS
#1.Remove PIN from SIM card.
#2.Insert the SIM card into the device and connect the power.
#3.The LED will start blinking quickly, and after logging in to the GSM network, it will start blinking slowly (1 time every 2 seconds).
#4.Connecting the purple, gray and white wires to ground (black) starts sending an SMS.
PROGRAMMING
Program the phone numbers that will receive SMS messages.
To do this, send an order using the example below.
| @#0048111111111#0048222222222#0048333333333 | for three numbers |
| @#0048111111111#0048222222222 | for two numbers |
| @#0048111111111 | for one number |
SMS TEXTS SENT BY THE DEVICE
| MAX alarm | Maximum level exceeded |
| OILER alarm | Oil/fat level exceeded |
| SLUDO alarm | Sludge level exceeded |
| Max, Oiler, Sludo = OK | Maximum, oil and sludge levels normal |
TECHNICAL DATA
| Power supply | 230V, 0.43A |
| Inputs | NO (normally open) |
| Ambient temperature | -30°C ÷ +60°C |
| Housing | IP 65 |
| Dimensions without glands | 75x110x59 mm |
| Glands | 2x M12, cable dimensions Ø 4.0-6.0 mm |
| Mounting method | Vertical |
| CE Compatibility | Yes |
